Support
You will find here all information you need to set up your antenna, test and calibrate it, and do your maintenance job.
You can also find out How the Antenna Works in receiving and transmitting signals from and to the satellite.
      Calibration
After setting up the antenna system, the last step is to point the antenna right to the satellite to be communicated with.
  1. Adjust the azimuth of the antenna. The azimuth is adjusted by rotating the hand-wheel on the axis of the azimuth actuator. It should be operated slowly and carefully.
  2. Adjust the elevation of the antenna. The elevation is adjusted by rotating the handle on the axis of the elevation actuator. It should be operated slowly and carefully.
  3. Determine the azimuth, elevation and polarization. They are determined by the following formula, respectively.

Elevation:

 

Azimuth:

 In the above formulas: